Homeá>áMICRO Kits/Frames & Accessoriesá>áReady / Bind N Fly MICRO Kitsá>áBlade
Phoenix Flight Gear 110mm Carbon Fiber FPV Racing Bind-N-Fly Quadcopter

Phoenix Flight Gear 110mm Carbon Fiber FPV Racing Bind-N-Fly Quadcopter

Item Id: PFG-110FPVMRTF
Your Price:
$125.00
Availability:
In Stock Now Shipping
Free Shipping
Choose Options
Micro Transmitter + Labeling & Setup
Accessories
Quantity
Email a friend Email a friend
Description
Phoenix Flight Gear 110mm Carbon Fiber

FPV RACING Bind-N-Fly Micro Quadcopter








The micro frame market has taken off with a revolution in flight controllers and a variety of coreless motors. This super light racing frame has a second top plate that secures your micro motors the top and bottom the motors strengthening the frame. Securing the motors with two points also makes this the most rigid frame that we have to offer to date. Build able with either 7 or 8mm motors you will be able to upgrade and reconfigure as your skills improve. With minimal nylon hardware and foam motor mounting we keep this frame light and easy to assemble.

For the racer in you, the top plate can be shifted forward with 7mm motors installed for face paced racing. Another reason we chose a two plate frame was to strengthen the frame to make it more rigid. To protect your flight controller we have also made two optional flight controller yards, one for the AlienWii and one for the blade NanoQX and Hubsan X4. If you are flying FPV we also have mounting place for an antenna protector post for the Spectrum VA1100. There is also a ledge for mounting the VA1100 and micro pico cameras on the front.

Specs:
Size: 113mm
Weight frame only: 3.5grams

Included:
Top Frame Plate
Bottom Frame Plate
2 - M3x15 nylon standoffs
4 - M3x6 nylon screws
4 - CL-0720-12 - coreless motor set, 7x20mm (2 CCW - 2 CW)
4 - Props HUBSAN Rotor for H107L 2Black & 2White
1 - BLADE 4-in-1 Flight Control Unit Rx/ESCs/Gyro (Nano QX FPV style)
Adhesive velcro
Adhesive foam 3M tape
Fish line


CL-0720-12 - coreless motor set, 7x20mm

(Speed: medium, for AlienWii and Nano QX FC)

**Comes with 4 Motors 2CW, 2CCW**





The CL-0720-12 is ideal for:

- Carrying cameras (efficient, smooth throttle response)
- Acrobatics (high torque, accurately matched CW/CCW pairs)
- Indoor flying (moderate top speed)

High quality coils specifically selected for micro copters make this motor produce more thrust and consume less electricity than most other coreless motors of this size. The perfect compromise for efficient but powerful flights!

The motors come with pre-fitted Micro-JST-1.25 plugs, compatible to the AlienWii flight controllers and to the Blade Nano QX flight controllers.

For fearless acro flying, we recommend the insanely durable 120mm polycarbonate frame with 7mm mounts.

The motors will work on many other micro quads (click "parts for RTF models" on the top menu for a model list), for most models (e.g. Hubsan, WLToys) you will need to solder the motors to the flight controller.

Specifications:

Speed: 12.000Kv
Operating voltage: 1.5-3.7V
Max. thrust: 24g (Hubsan X4 propeller)
1.5A load current at 3.7V (Hubsan X4 propeller)

Dimensions:
  • can diameter: 7mm
  • can length: 20mm
  • shaft diameter: 1mm
  • shaft length: 5mm
  • weight: 3.4g
  • wire length: 8cm
  • plugs: Micro-JST 1.25 plugs, pre-fitted

All motor packs contain equal amounts of clockwise and counter clockwise motors. To maximise performance and life span, dont run them in reverse!

Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black


Hubsan Rotor for H107L Black & White - Props

Hubsan X4 H107 Propeller Blades Props Rotor Set Factory Units H107L H107D H107C

Includes:
2 Black Propellers
2 White Propellers

4-in-1 Control Unit Rx/ESCs/Gyro: Nano QX FPV




Required for flight:
Battery (200-500mah)Radio system

**Micro Motor Tips**

1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.

Accessories:



Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"