Phoenix Flight Gear 110mm Carbon Fiber Micro-H Frame V2 Plate ONLY
(This is Version 2 Frame Plate)
**Fits ONLY MICROs with 8mm Motors**
**This is a REPLACEMENT FRAME ONLY!
Does NOT include mounting accessories**
New Improved V2 with wider FC mounting area
and room for mounting our new PFG DroneSkirts
**Fits ONLY MICROs with 8mm Motors**
This micro frame is a blast to fly and easy to build!
We have a great universal
micro-h frame, ultra light, weighing in at only 7 grams. Simple grommet
motor mounts hold a 8mm motor to give you the power to fly your micro
outdoors or with a small FPV system. Designed to work with many of the
popular micro quads, Hubsan X4, Blade Nano QX, Walkera Ladybird or any
other micro quad you want to try.
Upgrading
the motors on your micro quad really is a game changer. If you have
been limited to flying indoors or outdoors on the rare breezeless day,
upgrading your motors to 8mm will let you fly with all the power you’ll
need to sport fly outdoors and also fly with a micro FPV system. You can
also break away from the micro batteries that you have been restricted
to run due to battery compartment or payload capability. We have been
flying batteries in the 500-750mah range with flight times around 5-10
min depending on build.
The
frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high
gloss finish. We designed this frame to be as minimalist as possible of
the best in flight times and agility. Our choice of rubber motor mounts
was for a couple of reasons, eliminates any extra hardware, keep the
frame light and easy to build. Another great benefit of the rubber motor
mounts is that they will absorb vibration from the micro motors and
propellers.
Included:
- (1) Phoenix Flight Gear 110mm Carbon Fiber Micro-H Frame
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
