Phoenix Flight Gear 80mm Carbon Fiber
Micro-X Frame For 8mm Motors
**Fits ONLY MICROs with 8mm Motors**
**Pics below show (Optional items) Illustration for frame purpose only**
Designed for the new Blade Inductrix flight controller but works great with the Blade Nano QX and Hubsan FC or any FC that will fit.
This is our smallest frame to date and it flies best with the Inductrix FC. Even flies pretty smooth with high speed 8mm motors.
The Blade Nano QX FC doesn't hover as well with high speed motors.
I am guessing it is because the Indutrix FC is tuned different and for a smaller platform.
This frame is great for LOS acro flying or FPV with the added top accessory plate.
**Fits ONLY MICROs with 8mm Motors**
This micro frame is a blast to fly and easy to build!
We have a great universal micro-X frame, ultra light, weighing in at only 6.5grams. Simple grommet motor mounts hold a 8mm motor to give you the power to fly your micro outdoors or with a small FPV system. Designed to work with many of the popular micro quads, Hubsan X4, Blade Nano QX, Walkera Ladybird or any other micro quad you want to try.
Upgrading the motors on your micro quad really is a game changer. If you have been limited to flying indoors or outdoors on the rare breezeless day, upgrading your motors to 8mm will let you fly with all the power you’ll need to sport fly outdoors and also fly with a micro FPV system. You can also break away from the micro batteries that you have been restricted to run due to battery compartment or payload capability. We have been flying batteries in the 500-750mah range with flight times around 5-10 min depending on build.
The frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high gloss finish. We designed this frame to be as minimalist as possible of the best in flight times and agility. Our choice of rubber motor mounts was for a couple of reasons, eliminates any extra hardware, keep the frame light and easy to build. Another great benefit of the rubber motor mounts is that they will absorb vibration from the micro motors and propellers.
Included:
- Phoenix Flight Gear 80mm Carbon Fiber X-Frame for 8mm Motor
- 4 - 8mm motor grommets
- Adhesive foam
- Fish line
- Adhesive velcro
- Motor bumper foam
Weight: 6.5 grams
Add the 80mm Top Accessory Plate below:
Manufactured by Phoenix Flight Gear"Created and manufactured by pilots for pilots"