Phoenix Flight Gear Custom Built 95mm Micro-H 7mm
Motor Scisky Copter Bind-n-Fly
**This micro copter comes Custom built just Bind N Fly**
Just add TX from dropdown box to make a Ready To Fly, Will bind to ANY SPEKTRUM Transmitter
**We Solder on a Hubsan style connector so larger batteries can be used**
**PHOTOS BELOW WIL BE UPDATED WITH NEW SCISKY FLIGHT CONTROL PIC**
**3D parts shown below are optional**
Includes Parts in this Kit:
Phoenix Flight Gear 95mm Carbon Fiber
Micro-H Frame 7mm Motor Edition
**Photo shows OPTIONAL TOP PLATE**
**Photo shows OPTIONAL TOP PLATE**
**Fits ONLY MICROs with 7mm Motors**
This micro frame is a blast to fly and easy to build!
We have a great universal micro-h frame, ultra light, weighing in at only 7grams.
Simple grommet motor mounts hold a 7mm motor to give you the power to
fly your micro outdoors or with a small FPV system. Designed to work
with many of the popular micro quads, Hubsan X4, Blade Nano QX, Walkera
Ladybird or any other micro quad you want to try.
Upgrading the motors on your micro quad really is a game changer.
If you have been limited to flying indoors or outdoors on the rare
breezeless day, upgrading your motors to 7mm will let you fly with all
the power you’ll need to sport fly outdoors and also fly with a micro
FPV system. You can also break away from the micro batteries that you
have been restricted to run due to battery compartment or payload
capability. We have been flying batteries in the 500-750mah range with
flight times around 5-10 min depending on build.
The frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high gloss finish.
We designed this frame to be as minimalist as possible of the best in
flight times and agility. Our choice of rubber motor mounts was for a
couple of reasons, eliminates any extra hardware, keep the frame light
and easy to build. Another great benefit of the rubber motor mounts is
that they will absorb vibration from the micro motors and propellers.
Included:
- Phoenix Flight Gear 110mm Carbon Fiber Micro-H Frame
- 4 - 7mm motor grommets
- Adhesive foam
- Fish line
- Adhesive velcro
- Motor bumper foam
Weight: 7gramsCL-0720-12 - Coreless Motor set, 7x20mm
(Speed: medium, for AlienWii and Nano QX FC)
**Comes with 4 Motors 2CW, 2CCW**
The CL-0720-12 is ideal for:- Carrying cameras (efficient, smooth throttle response)
- Acrobatics (high torque, accurately matched CW/CCW pairs)
- Indoor flying (moderate top speed)
High
quality coils specifically selected for micro copters make this motor
produce more thrust and consume less electricity than most other
coreless motors of this size. The perfect compromise for efficient but
powerful flights!
The motors come with pre-fitted Micro-JST-1.25
plugs, compatible to the AlienWii flight controllers and to the Blade
Nano QX flight controllers.
For fearless acro flying, we recommend the insanely durable 120mm polycarbonate frame with 7mm mounts.
The
motors will work on many other micro quads (click "parts for RTF
models" on the top menu for a model list), for most models (e.g. Hubsan,
WLToys) you will need to solder the motors to the flight controller.
Specifications: Speed: 12.000Kv
Operating voltage: 1.5-3.7V
Max. thrust: 24g (Hubsan X4 propeller)
1.5A load current at 3.7V (Hubsan X4 propeller)
Dimensions:- can diameter: 7mm
- can length: 20mm
- shaft diameter: 1mm
- shaft length: 5mm
- weight: 3.4g
- wire length: 8cm
- plugs: Micro-JST 1.25 plugs, pre-fitted
All
motor packs contain equal amounts of clockwise and counter clockwise
motors. To maximise performance and life span, dont run them in reverse!
Motor rotation and correct polarity is indicated by the wire color:clockwise: red +, blue -
counter clockwise: white +, black
Quanum Pico Micro Scisky 32bit Brushed Flight
Control Board w/Motor Plugs+Battery Connector
**Comes with Motor Plugs+Battery Connector Pre-Soldered**
Same Motor plug as our MMW Chaoli Motors
Please choose Hubsan style or JST battery connector from dropdown
box and we will solder your connector before shipping
Good things do come in small packages and in this case its not just good, its great.
Setting the standard in Multi-Rotors once again, Quanum has listened
to builders of mini and micro quadcopters and released the a full
function Brushed Flight Control Board which was purpose designed and
built for quads around the 100mm and sub 100mm class.
This brushed FC has four built in ESC's
at 4.3A per FET and is ideal for brushed motors in the 6~8mm size
range. It also has a built in DSM2/DSMX compatible receiver.
The Pico is a full 32bit Cleanflight supported FC board and has a
micro USB connection. Once you have downloaded cleanflight on your PC,
you simply plug in your Pico Quanum FC Board into your PC and you have
complete control over its settings. Its that easy.
NOTE: DO NOT PLUG THE BATTERY AND USB IN AT THE SAME TIME, THE RX WILL RECIVE POWER FROM THE USB FOR SET UP. THE FETS WILL BE DAMAGED OTHERWISE.
Specs:
ESC: Brushed 4.3A x 4 (2~32KHz 4KHz stock) 6,7,8mm motors compatible
RF: DSM2/DSMX compatible
Size: 20x33x6mm
Weight: 2.5g
Software: Cleanflight or Baseflight compatible
Voltage: 1s compatable, with built in 5V DC/DC converter
Hubsan Rotor for H107L Black & White - Props
Hubsan X4 H107 Propeller Blades Props Rotor Set Factory Units H107L H107D H107C
Includes:2 Black Propellers
2 White Propellers
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.4-Let motors cool a little in between battery packs.5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.7-Buy spares because if you crash a lot you will need them.
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"
