Phoenix Flight Gear Custom Built 95mm Micro-H 8.5mm
Motor Scisky Copter Bind-n-Fly
**This micro copter comes Custom built just Bind N Fly**
Just add TX from dropdown box to make a Ready To Fly, Will bind to ANY SPEKTRUM Transmitter
**We Solder on a Hubsan style connector so larger batteries can be used**
**PHOTOS BELOW WIL BE UPDATED WITH NEW SCISKY FLIGHT CONTROL PIC**
**3D parts shown below are optional**
Includes Parts in this Kit:
Phoenix Flight Gear 95mm Carbon Fiber
Micro-H Frame 8.5mm Motor Edition
**Photo shows OPTIONAL SHORT TOP PLATE**
**Photo shows OPTIONAL SHORT TOP PLATE**
**Fits ONLY MICROs with 8.5mm Motors**
This micro frame is a blast to fly and easy to build!
We have a great universal
micro-h frame, ultra light, weighing in at only 6.8grams. Simple grommet
motor mounts hold a 8mm motor to give you the power to fly your micro
outdoors or with a small FPV system. Designed to work with many of the
popular micro quads, Hubsan X4, Blade Nano QX, Walkera Ladybird or any
other micro quad you want to try.
Upgrading
the motors on your micro quad really is a game changer. If you have
been limited to flying indoors or outdoors on the rare breezeless day,
upgrading your motors to 8.5mm will let you fly with all the power you’ll
need to sport fly outdoors and also fly with a micro FPV system. You can
also break away from the micro batteries that you have been restricted
to run due to battery compartment or payload capability. We have been
flying batteries in the 500-750mah range with flight times around 5-10
min depending on build.
The
frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high
gloss finish. We designed this frame to be as minimalist as possible of
the best in flight times and agility. Our choice of rubber motor mounts
was for a couple of reasons, eliminates any extra hardware, keep the
frame light and easy to build. Another great benefit of the rubber motor
mounts is that they will absorb vibration from the micro motors and
propellers.
Included:
- Phoenix Flight Gear 95mm Carbon Fiber Micro-H Frame
- 4 - 8.5mm motor grommets
- Adhesive foam
- Fish line
- Adhesive velcro
- Motor bumper foam
Weight: 6.8g
CL-0820-15 Hyper Speed Coreless Motor 8.5x20mm
**In Stock Now Shipping**


Motors come with Micro JST-1.25 plugs Installed.
This is the same connector that is on the Nano QX and AlienWii boards so motors will plug right in.
Performance data:
- operating voltage: 1.5-3.7V
- max. thrust: 40g (direct drive, Hubsan X4 propeller)
- 2.75A max. load current at 3.7V (Hubsan X4 propeller)
- factory lifetime rating: 5-6 hours
Dimensions:
- can diameter: 8.5mm
- can length: 20mm
- shaft diameter: 1mm
- shaft length: 5mm
- weight: 4.9g
All motor packs contain equal amounts of clockwise and counter
clockwise motors. To maximise performance and life span, dont run them
in reverse!
Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.
2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.
3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.
4-Let motors cool a little in between battery packs.
5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.
6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.
7-Buy spares because if you crash a lot you will need them.
Quanum Pico Micro Scisky 32bit Brushed Flight
Control Board w/Motor Plugs+Battery Connector
**Comes with Motor Plugs+Battery Connector Pre-Soldered**
Same Motor plug as our MMW Chaoli Motors
Please choose Hubsan style or JST battery connector from dropdown
box and we will solder your connector before shipping

Good things do come in small packages and in this case its not just good, its great.
Setting the standard in Multi-Rotors once again, Quanum has listened
to builders of mini and micro quadcopters and released the a full
function Brushed Flight Control Board which was purpose designed and
built for quads around the 100mm and sub 100mm class.
This brushed FC has four built in ESC's
at 4.3A per FET and is ideal for brushed motors in the 6~8mm size
range. It also has a built in DSM2/DSMX compatible receiver.
The Pico is a full 32bit Cleanflight supported FC board and has a
micro USB connection. Once you have downloaded cleanflight on your PC,
you simply plug in your Pico Quanum FC Board into your PC and you have
complete control over its settings. Its that easy.
NOTE: DO NOT PLUG THE BATTERY AND USB IN AT THE SAME TIME, THE RX WILL RECIVE POWER FROM THE USB FOR SET UP. THE FETS WILL BE DAMAGED OTHERWISE.
Specs:
ESC: Brushed 4.3A x 4 (2~32KHz 4KHz stock) 6,7,8mm motors compatible
RF: DSM2/DSMX compatible
Size: 20x33x6mm
Weight: 2.5g
Software: Cleanflight or Baseflight compatible
Voltage: 1s compatable, with built in 5V DC/DC converter
Hubsan Rotor for H107L Black & White - Props

Hubsan X4 H107 Propeller Blades Props Rotor Set Factory Units H107L H107D H107C
Includes:2 Black Propellers
2 White Propellers
**Micro Motor Tips**1-Drill props with #62 drill bit so they press on all the way.2-Rest motor bottom end cap on corner of a table or something to keep it from popping off when you push the props on.3-Add a little epoxy to the edges of the bottom end caps to keep them from popping off in a crash or when pushing props on.4-Let motors cool a little in between battery packs.5-Replace nicked or damaged props as damaged props will cause the motor to run hotter and will affect efficiency.6-Make sure micro is balanced as an unbalanced micro will not fly as well and motors will run hotter and will affect efficiency.7-Buy spares because if you crash a lot you will need them.Add 95mm Top Accessory Plate:
Add 3D Printed Accessories:
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"