Phoenix Flight Gear X90PG-7 90mm Carbon Fiber
Micro-X Frame w/Built-In Prop Guards for 7mm Motors
**Here is a race video using this frame with 7mm
Medium Speed motors and a Blade Nano QX FC**
(Frame only)

**Top plate and electronics in the photo below are an OPTIONAL Accessory**
**Fits ONLY MICROs with 7mm Motors**
This micro frame is a blast to fly and easy to build!
We have a great universal micro-X frame, with built-in prop guards weighing in at only 11.25 grams.
Simple grommet motor mounts hold a 7mm motor to give you the power to
fly your micro outdoors or with a small FPV system. Designed to work
with many of the popular micro quads, Hubsan X4, Blade Nano QX, Walkera
Ladybird or any other micro quad you want to try.
With our new built-in prop guards you can hit things like walls and just bounce off.
Upgrading the motors on your micro quad really is a game changer.
If you have been limited to flying indoors or outdoors on the rare
breezeless day, upgrading your motors to 7mm will let you fly with all
the power you’ll need to sport fly outdoors and also fly with a micro
FPV system. You can also break away from the micro batteries that you
have been restricted to run due to battery compartment or payload
capability. We have been flying batteries in the 500-750mah range with
flight times around 5-7 min depending on build.
The frame is cut from 1.0mm sold carbon fiber 3K twill weave with a high gloss finish.
We designed this frame to be as minimalist as possible of the best in
flight times and agility. Our choice of rubber motor mounts was for a
couple of reasons, eliminates any extra hardware, keep the frame light
and easy to build. Another great benefit of the rubber motor mounts is
that they will absorb vibration from the micro motors and propellers.
Included:
- Phoenix Flight Gear 90mm Carbon Fiber Micro-X Frame
- 4 - 7mm motor grommets
- Adhesive foam
- Fish line
- Adhesive velcro
- Motor bumper foam
Weight: 11.25
Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"