Phoenix Flight Gear Xtreme CarbonSpyder FPV Micro Frame

Turn the up the fun on your EYEOne Xtreme with this Spyder frame conversion. Love the cool clean look of solid 2.0mm 3k twill weave carbon fiber cut here in the Phoenix Flight Gear facility. We at PFG created this frame to improve the FPV and camera views by reformatting the frames arm span slightly to turn the Xtreme Quad into an Xtreme Spyder frame.

Frame weight is greatly reduced from the stock frame, 25g. Our carbon fiber frame, only 17.5g.

We have moved the arms out to a spyder configuration to improve the prop in view problem found with the stock frame.

The conversion takes about an hour to complete, requires minimal skill and, no soldering needed. Simply disassemble your Xtreme and rebuild onto the carbon fiber frame.

Included:
PFG Xtreme CarbonSpyder FPV Micro Frame
8 - M2x6 screws
12 - M2 Locknuts
8 - M2x12 screws
4 - M2 spacers
4 - M2 washers
4 - 1/4" standoffs (optional, install with PFG XtremeMount Camera / Accessory Mount)
Velcro Strap
Thick Foam
Thin Foam

Required:
1.5mm allen wrench
#1 phillips head wrench
4mm nut driver
Drill
5/32" drill bit.

Manufactured by Phoenix Flight Gear
"Created and manufactured by pilots for pilots"